Star Trek Builders Thread!

1161719212251

Comments

  • ThalekThalek Posts: 318
    edited December 1969

    Mylochka: making our figures look good since . . . [grin]

  • edited December 1969

    Redfern said:
    Went grayscale to try capturing the feel of a promotional snapshot.

    Though in retrospect, I wonder if they would have gone to theespense of sculpting Dilithium crystal props. Probably not. More likely, if they knew of props remaing from some other production, they would "borrow" them.

    Sincerely,

    Bill

    Wow, great pic! And that is the best Shatner morph for Kirk I think I have seen. Is the morph and hair available somewhere? I would not mind paying for one that good. For some reason Shatner's face is one of the hardest to replicate.

  • mylochkamylochka Posts: 168
    edited December 1969

    If I'm not missing my guess, it's my Kirk Hair for M4 (available on ShareCG) and Werts' Shatner morph -- which is sadly no longer available.

    Lovely work! Please post this to the DA site!

  • RedfernRedfern Posts: 1,578
    edited August 2012

    Well, yes , no and okay.


    Yes, it's your M4 based Kirk hair, but no, that is not the M4 based Werts sculpted Kirk morph. It's about 2 and a half figure releases old. At one time, XcalPro released a CD with the Trek based models he had available at that time. One paid for the cost of "burning" and shipping. On that disk along with the stuff provided on his site was a "work in progress" for a Kirk morph...meant for the venerable Michael 1 and 2. Since the only uniforms available at that time were his meant for the Poser 4 nude male (aka "the Dork"), I applied the morph to the extra mesh that came with Michael 2, the M2P4 hybrid figure, basically Michael 2 with a body reshaped and rigged to wear the Dork's clothing. Itwasn't easy as the morph was not properly positioned. When I first loaded it, M2P4's head gained Shatner's features, but the head shot to the floor, the neck stretching in freakish non-euclidian fashion. It took me awhile to properly position the morph so it wouldn't turn Kirk into some n-dimensional giraffe. Once I managed, I saved the figure. Recently, I removed your earlier Shatner toupe meant for the Dork and fitted him with your latest sculpt.


    Finally, okay, if you think this piece is worthy of the STAU, I'll submit it. (But then I'll ruin my reputation as an exclusive illustrator of M'Ress upon DeviantArt. ;-P )


    Sincerely,


    Bill

    Post edited by Redfern on
  • MardookMardook Posts: 291
    edited December 1969

    I'd like to see some Star Trek alien creatures for DAZ or Poser; How about Tholians, Mugato, and the Gorn.

    Check out the original Tholians and some modern conceptualized art for them.

    http://en.memory-alpha.org/wiki/Tholian
    http://subspacecommunique.com/node/919
    http://guardiansofthefrontier.enjin.com/forum/post/last/m/3747116/viewthread/3549327-season-6-tholians

    Check out classic Mugato and some newer conceptualized art .

    http://freelanceflaneur.blogspot.ca/2011/11/borne-no.html
    http://jnasconeart.blogspot.ca/2012/04/mugato-in-game-shots-and-breakdown.html

    Check out the Gorn.

    http://www.newanimal.org/reptoids.htm
    http://stexpanded.wikia.com/wiki/Gorn
    http://everystartrekever.com/2012/06/07/the-gorn-and-the-new-star-trek-game/

    ==================================================================================

    These would be cool to see apppear on Poser or Daz Studio, I imagine that rigging a Tholian on Poser or Daz Studio would be a nightmare with their multiple legs and arms, shading the thing would be hell too especially if your gonna go for the crystalline look. Shiney, gem stone like or simply a Christmas Star Ornament thingy.

    Mugato would work with Genesis and perhaps the new Genesis Gorilla figure from Daz. The hair I imagine could be achieved through Alessandro's new Hair Shader thingy which looks amazing BTW http://www.daz3d.com/forums/discussion/381/P120

    Please forgive me if people have added this items somewhere that I may have missed. :D

  • LycanthropeXLycanthropeX Posts: 2,287
    edited December 1969

    mardook said:
    I'd like to see some Star Trek alien creatures for DAZ or Poser; How about Tholians, Mugato, and the Gorn.

    Check out the original Tholians and some modern conceptualized art for them.

    http://en.memory-alpha.org/wiki/Tholian
    http://subspacecommunique.com/node/919
    http://guardiansofthefrontier.enjin.com/forum/post/last/m/3747116/viewthread/3549327-season-6-tholians

    Check out classic Mugato and some newer conceptualized art .

    http://freelanceflaneur.blogspot.ca/2011/11/borne-no.html
    http://jnasconeart.blogspot.ca/2012/04/mugato-in-game-shots-and-breakdown.html

    Check out the Gorn.

    http://www.newanimal.org/reptoids.htm
    http://stexpanded.wikia.com/wiki/Gorn
    http://everystartrekever.com/2012/06/07/the-gorn-and-the-new-star-trek-game/

    ==================================================================================

    These would be cool to see apppear on Poser or Daz Studio, I imagine that rigging a Tholian on Poser or Daz Studio would be a nightmare with their multiple legs and arms, shading the thing would be hell too especially if your gonna go for the crystalline look. Shiney, gem stone like or simply a Christmas Star Ornament thingy.

    Mugato would work with Genesis and perhaps the new Genesis Gorilla figure from Daz. The hair I imagine could be achieved through Alessandro's new Hair Shader thingy which looks amazing BTW http://www.daz3d.com/forums/discussion/381/P120

    Please forgive me if people have added this items somewhere that I may have missed. :D

    Excalbians rock!!!! i'd like to see one for Poser

  • ThalekThalek Posts: 318
    edited December 1969

    Excalbians are just a bunch of stoners. Hortas rock! [grin]

  • LycanthropeXLycanthropeX Posts: 2,287
    edited December 1969

    lol funny

  • mdbruffymdbruffy Posts: 2,345
    edited August 2012

    Thalek said:
    Excalbians are just a bunch of stoners. Hortas rock! [grin]

    Ask and ye shall receive:

    http://mdbruffy.deviantart.com/gallery/#/d53qyoj

    This is a obj with texture and transmap.

    horta_by_mdbruffy-d53qyoj.jpg
    900 x 879 - 171K
    Post edited by mdbruffy on
  • mylochkamylochka Posts: 168
    edited December 1969

    Redfern -- Oh, wow! I can't believe you got that head to work! You ought to get Tony to release it on XCal. It looks great. I've always found Shatner's face super-difficult to reproduce.

    And yes, I'd be proud to have it on STAU...

    ...Isn't that M'Ress behind that rock...?

  • mylochkamylochka Posts: 168
    edited December 1969

    DOWNLOAD HERE: http://www.sharecg.com/v/64115/view/11/Poser/Endor-Braids-for-V3-and-V4

    Star Wars instead of Star Trek, but a practical braided updo for all sorts of Science Fiction and Fantasy renders.

    Endor_BraidsAD.png
    605 x 608 - 432K
  • LycanthropeXLycanthropeX Posts: 2,287
    edited December 1969

    if one were to start a Horta farm, would that be considered Horta-culture?

  • MardookMardook Posts: 291
    edited December 1969

    if one were to start a Horta farm, would that be considered Horta-culture?

    Heheh cute... anyway. I recall seeing a Tholian in Lightwave format on Foundation 3D, just checked and it appears to have been removed.
    :D

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    if one were to start a Horta farm, would that be considered Horta-culture?


    OUCH! Pun Police!! Pun Police! :)

  • ThalekThalek Posts: 318
    edited December 1969

    if one were to start a Horta farm, would that be considered Horta-culture?

    Good question. I suppose it could also be considered a rock garden . . .

  • LycanthropeXLycanthropeX Posts: 2,287
    edited December 1969

    Hortas give new meaning to "pet rocks"

  • Robert FreiseRobert Freise Posts: 4,260
    edited December 1969

    Thalek said:
    if one were to start a Horta farm, would that be considered Horta-culture?

    Good question. I suppose it could also be considered a rock garden . . .

    Geo scapeing maybe

  • jaguarry3jaguarry3 Posts: 230
    edited December 1969

    mardook said:
    I'd like to see some Star Trek alien creatures for DAZ or Poser; How about Tholians, Mugato, and the Gorn.

    Check out the original Tholians and some modern conceptualized art for them.

    http://en.memory-alpha.org/wiki/Tholian
    http://subspacecommunique.com/node/919
    http://guardiansofthefrontier.enjin.com/forum/post/last/m/3747116/viewthread/3549327-season-6-tholians

    Check out classic Mugato and some newer conceptualized art .

    http://freelanceflaneur.blogspot.ca/2011/11/borne-no.html
    http://jnasconeart.blogspot.ca/2012/04/mugato-in-game-shots-and-breakdown.html

    Check out the Gorn.

    http://www.newanimal.org/reptoids.htm
    http://stexpanded.wikia.com/wiki/Gorn
    http://everystartrekever.com/2012/06/07/the-gorn-and-the-new-star-trek-game/

    ==================================================================================

    These would be cool to see apppear on Poser or Daz Studio, I imagine that rigging a Tholian on Poser or Daz Studio would be a nightmare with their multiple legs and arms, shading the thing would be hell too especially if your gonna go for the crystalline look. Shiney, gem stone like or simply a Christmas Star Ornament thingy.

    Mugato would work with Genesis and perhaps the new Genesis Gorilla figure from Daz. The hair I imagine could be achieved through Alessandro's new Hair Shader thingy which looks amazing BTW http://www.daz3d.com/forums/discussion/381/P120

    Please forgive me if people have added this items somewhere that I may have missed. :D

    Here are my attempts at the Mugato and Tholian.
    The Magatoo was done using the Millennium Gorilla , Daz horns with a freebie long hair pack that used to be available in the freepository.
    The Tholian is just a prop I made
    Mugato_sml.jpg
    600 x 600 - 107K
    Tholian_2_sml.jpg
    600 x 739 - 135K
  • GRFK DSGN UnlimitedGRFK DSGN Unlimited Posts: 1,040
    edited December 1969

    Page 14 is now posted to my blog for those who are interested. Drop me an email if you want the link. Please drop by and leave a comment or two...

    David

    14_Page_14_preview.jpg
    600 x 464 - 291K
  • mdbruffymdbruffy Posts: 2,345
    edited August 2012

    Is there such a thing as a free conversion program for translating a .mov file into a.avi file? And if there is, where would one find it?

    Redfern and Protope, please check your e-mails. Thank you.


    Never m ind. Found one. it's called "ConverterLite" and works pretty good.

    Post edited by mdbruffy on
  • MardookMardook Posts: 291
    edited December 1969

    Here are my attempts at the Mugato and Tholian.
    The Magatoo was done using the Millennium Gorilla , Daz horns with a freebie long hair pack that used to be available in the freepository.
    The Tholian is just a prop I made

    Those look friggin cool although the tholian is not quite accurate. I actually have the Lightwave model for the Tholian. If I were to try to attempt to rig it for Daz, I'd have to get permission by the original model maker.

    That Mugato will look awesome when Alessandro's Hair Shader/Plugin products hits the store.

    Keep up the good work! (:D

  • MattymanxMattymanx Posts: 6,879
    edited December 1969

    Ships of the line update:

    The USS Chimera has been added.


    The USS Cheyenne is on its way.

  • MattymanxMattymanx Posts: 6,879
    edited August 2012

    Soon..... :D

    All Im going to say is that this is one beautiful mesh!!!

    USS_Daedalus-05.jpg
    1200 x 1200 - 1M
    Post edited by Mattymanx on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Mattymanx said:
    Soon..... :D

    All Im going to say is that this is one beautiful mesh!!!

    Looks Good. Just tell me the name and registry are on a texture map and Not built into the mesh.

  • PDSmithPDSmith Posts: 712
    edited December 1969

    Just wondering if anyone would be interested since everyone is primarily v4 and m4 users. I'm doing a serious 'bonehead' thing here and going to change directions in looks of my O'bannon-2 comic and switch everyone over to Genesis and Defiant for Genesis about 19 pages in of a 94 page comic.

    Anyone interested in this freebie or will it be a personal thing?. Keep in mind this wont be a runtime set up as genesis is but way different.

    Paul

    defiant_copy.jpg
    530 x 944 - 343K
  • MattymanxMattymanx Posts: 6,879
    edited December 1969

    mdbruffy said:
    Mattymanx said:
    Soon..... :D

    All Im going to say is that this is one beautiful mesh!!!

    Looks Good. Just tell me the name and registry are on a texture map and Not built into the mesh.


    Sorry, thats all mesh.

    But fear not, I am working on a solution to that.

    ps, the Daedalus is a lightweight mesh.

  • fixmypcmikefixmypcmike Posts: 19,565
    edited December 1969

    Nice job. Are you doing male versions as well?

  • GreywulfGreywulf Posts: 58
    edited December 1969

    Oh my. Yes please!

  • MattymanxMattymanx Posts: 6,879
    edited December 1969

    Two new ships on their way (not counting the Dadalus)

    Nova Class and Challenger Class!!! :D :D :D

    Nova_Class-01.jpg
    200 x 200 - 48K
    Challenger_Class-02.jpg
    600 x 600 - 331K
  • Richard HaseltineRichard Haseltine Posts: 96,696
    edited December 1969

    PDSmith's thread on TOS uniform for Defiant merged in by request.

This discussion has been closed.