DAZ PAs Christmas Countdown - Annual Freebies 2012

17810121319

Comments

  • shanteshante Posts: 206
    edited December 1969

    Oh Nooooo!
    Love this and it's only for D/S?
    I am sooooo bummed.
    Looks really nice, though I can't use it now, thanks for the gift!

  • patience55patience55 Posts: 7,006
    edited December 1969

    Oh more hair, thank you! :-)

    And Poser users, yes, there's the .cr2 calling for the included poser script also.

  • foxyladyfoxylady Posts: 0
    edited December 1969

    Thank you, maclean! I just saw this, very nice.

  • SpitSpit Posts: 2,342
    edited December 1969

    Thank you, April, and Seasons Greetings back at you!

  • AprilYSHAprilYSH Posts: 1,481
    edited December 2012

    The gift for Day 9 is a set of DS Character Scaling Presets
    presented by Morph and DS aficionado, DAZ PA 3DProclivity!!!

    Download: https://www.dropbox.com/s/qcnsurq73v0w7k1/3DProclivity_presets_Xmas2012.zip
    Readme: https://www.dropbox.com/s/slo3rd4jpss2u0r/3DProclivity_presets_readme.txt

    3DProclivity's shop: http://www.daz3d.com/shop/3DProclivity

    Her message and card below :lol:

    IMPORTANT NOTES from 3DP:

    These presets were made for Genesis and only work correctly on characters that do not change the base scaling/height when dialed.

    These include Genesis (of course), Genesis Male/Female, V3, V4, A4, S5 (Curvy Only), D3, MS Lycan, and the DAZ Horse 2. Also worked on the Gorilla (if you disregard the high spot on its head), AT's Being (High spot too), and Joequick's Mr. Simian freebie. V5 + V5 Model together scale fine. May be others that scale accurately too but these are the ones I tested.

    The presets work "well enough" on the following characters (off by 1-6 inches but close enough for most artwork): M3, M4, M5, H3, H4, V5, V5 Model, A3, and Freak 3

    Others tested did increase or decrease in size but not as labeled on the preset: F4, Troll, Mr. Hyde, H5, Hitomi, AT Baby and the Genesis Child. (For example, if you use the Max 10' preset on the AT Baby, you get a 7' baby. Impressive but not 10' as labeled. If you use the 3' one, you get a microbaby. lol About 2.5% of Genesis. Apparently, rather than setting the scale to a certain percentage, the preset merely adds or subtracts what it would take to make the Genesis Base a certain height. Thus it subtracts almost 3' from the baby, leaving it just inches tall but takes the Troll down to about 6'.)

    Anyway, if you have models that aren't at 100% scale with Genesis, just play around with the presets and see what works for your scene. Or, do a set that works for your favorite oversized or undersized Genesis shape. :)

    Have a happy holiday season and a good year!

    3DProclivity_presets_Xmas2012.jpg
    1137 x 1864 - 2M
    Post edited by AprilYSH on
  • WilmapWilmap Posts: 2,917
    edited December 1969

    AprilYSH said:
    The gift for Day 9 is a set of DS Character Scaling Presets
    presented by Morph and DS aficionado, DAZ PA 3DProclivity!!!

    Download: https://www.dropbox.com/s/qcnsurq73v0w7k1/3DProclivity_presets_Xmas2012.zip
    Readme: https://www.dropbox.com/s/slo3rd4jpss2u0r/3DProclivity_presets_readme.txt

    3DProclivity's shop: http://www.daz3d.com/shop/3DProclivity

    Her message and card below :lol:

    IMPORTANT NOTES from 3DP:

    These presets were made for Genesis and only work correctly on characters that do not change the base scaling/height when dialed.

    These include Genesis (of course), Genesis Male/Female, V3, V4, A4, S5 (Curvy Only), D3, MS Lycan, and the DAZ Horse 2. Also worked on the Gorilla (if you disregard the high spot on its head), AT's Being (High spot too), and Joequick's Mr. Simian freebie. V5 + V5 Model together scale fine. May be others that scale accurately too but these are the ones I tested.

    The presets work "well enough" on the following characters (off by 1-6 inches but close enough for most artwork): M3, M4, M5, H3, H4, V5, V5 Model, A3, and Freak 3

    Others tested did increase or decrease in size but not as labeled on the preset: F4, Troll, Mr. Hyde, H5, Hitomi, AT Baby and the Genesis Child. (For example, if you use the Max 10' preset on the AT Baby, you get a 7' baby. Impressive but not 10' as labeled. If you use the 3' one, you get a microbaby. lol About 2.5% of Genesis. Apparently, rather than setting the scale to a certain percentage, the preset merely adds or subtracts what it would take to make the Genesis Base a certain height. Thus it subtracts almost 3' from the baby, leaving it just inches tall but takes the Troll down to about 6'.)

    Anyway, if you have models that aren't at 100% scale with Genesis, just play around with the presets and see what works for your scene. Or, do a set that works for your favorite oversized or undersized Genesis shape. :)

    Have a happy holiday season and a good year!

    Do these work in DS4 or is this another item I can't use?

  • KeryaKerya Posts: 10,943
    edited December 1969

    Thank you! Those are sounding useful!
    (Microbabies aren't bad either ;) )

    Wendy: I looked - they are in duf format, so it's 4.5. Sorry

  • LordHardDrivenLordHardDriven Posts: 937
    edited December 2012

    wilmap said:
    AprilYSH said:
    The gift for Day 9 is a set of DS Character Scaling Presets
    presented by Morph and DS aficionado, DAZ PA 3DProclivity!!!

    Download: https://www.dropbox.com/s/qcnsurq73v0w7k1/3DProclivity_presets_Xmas2012.zip
    Readme: https://www.dropbox.com/s/slo3rd4jpss2u0r/3DProclivity_presets_readme.txt

    3DProclivity's shop: http://www.daz3d.com/shop/3DProclivity

    Her message and card below :lol:

    IMPORTANT NOTES from 3DP:

    These presets were made for Genesis and only work correctly on characters that do not change the base scaling/height when dialed.

    Do these work in DS4 or is this another item I can't use?

    Since it says these presets were made for Genesis I'm guessing it's a pretty safe bet they work in DS4 :)

    Post edited by LordHardDriven on
  • WilmapWilmap Posts: 2,917
    edited December 1969

    No they don't work as they are in .duf format that DS4 can't read!

  • shanteshante Posts: 206
    edited December 1969

    Oh more hair, thank you! :-)

    And Poser users, yes, there's the .cr2 calling for the included poser script also.

    Yes but isn't that so it can be exported with the new D/S exporter/Converter to Poser9 Tool?
    Or is it working as a .Cr2 in Poser 7+ without conversion?

  • foxyladyfoxylady Posts: 0
    edited December 1969

    Thank you for the hair, April.

  • 3DProclivity3DProclivity Posts: 538
    edited December 2012

    wilmap said:

    Do these work in DS4 or is this another item I can't use?

    Probably not but I don't know for sure. Please test them and see.

    I made them in DS 4.5 because they were originally going to be part of a commercial product and I wanted to make them compatible with Poser and DS...but I decided to give them away instead because they didn't belong to just one product IMHO. So I never got to the point of testing them in Poser or DS4.

    ========

    And if they work in Poser, with or without conversion, please let others know. :)

    I hope they work for everyone who wants them, but I'm not going to apologize if they don't, 'cause it's a freebie. But I can say my next Xmas gift for this giveaway should work for everyone who uses Genesis in Poser, DS4, or DS 4.5.

    Happy Holidays!

    PS: If "you" (meaning any one of you) are super unhappy that you can't use them in DS4, contact me via pm and I'll tell you exactly how you can make the legacy files (i.e. the presets).

    Post edited by 3DProclivity on
  • 3DProclivity3DProclivity Posts: 538
    edited December 1969

    Kerya said:
    Thank you! Those are sounding useful!
    (Microbabies aren't bad either ;) )

    Wendy: I looked - they are in duf format, so it's 4.5. Sorry

    You are welcome. Hehehe...

    When it happened the first time, when I shrank the baby, I had to laugh picturing all those little wee ones terrorizing some poor house cat, dog, or whatnot. lol

  • edited December 1969

    Thank you! Thank you!

  • Alisa Uh-LisaAlisa Uh-Lisa Posts: 1,308
    edited December 1969

    Thanks so much, 3DProclivity! These will be handy :)

  • SickleYieldSickleYield Posts: 7,622
    edited December 1969

    Thanks to April for the awesome hair and to 3dProclivity for the scaling presets!

  • KalisxKalisx Posts: 112
    edited December 1969

    Thank you 3DProclivity and happy Holiday to you too.

  • hermana5hermana5 Posts: 0
    edited December 1969

    Many thanks and happy holidays.

  • scorpioscorpio Posts: 8,296
    edited December 1969

    Thank you to Aprilysh for the hair and 3DProclivity for the scale presets.

    micro-baby.jpg
    1000 x 707 - 90K
  • JOdelJOdel Posts: 6,242
    edited December 1969

    The scaling will be very useful. Thank you!

  • 3DProclivity3DProclivity Posts: 538
    edited December 1969

    Thank you to Aprilysh for the hair and 3DProclivity for the scale presets.

    Cool render. Inspiring. Maybe I will find some use for microbaby afterall.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Thank you to Aprilysh for the hair and 3DProclivity for the scale presets.

    Cool render. Inspiring. Maybe I will find some use for microbaby afterall.

    I thought of half a dozen possible renders....right off, but don't have the time to do any of them, right now (heck, I still don't have all of LAST year's items installed...)

  • GeroblueJimGeroblueJim Posts: 0
    edited December 1969

    Thanks ! Wowsers !

  • AprilYSHAprilYSH Posts: 1,481
    edited December 1969

    lol @ microbaby. fun idea!

  • SpitSpit Posts: 2,342
    edited December 1969

    Thank you 3dproclivity for the wonderful scaling presets! and thank you Scorpio64dragon for the delightful micro-baby pic!

  • SpyroRueSpyroRue Posts: 5,020
    edited December 1969

    AprilYSH said:
    The gift for Day 8 is Ciri Hair, dreadshawk for Genesis, presented by
    your friendly neighborhood 3d hairdresser lol ... DAZ PA, AprilYSH!!!

    *** ds4.5 and dson import for poser 9+ ***

    Download: http://shop.aprilsvanity.com/-free-items/ciri-hair/prod_133.html

    AprilYSH's shop: http://www.daz3d.com/shop/aprilysh

    And my card below :lol:

    My tribe sends many thanks! The warriors feel much more fit for their duties :cheese:

  • AprilYSHAprilYSH Posts: 1,481
    edited December 2012

    The gift for Day 10 is the Christmas Train,
    presented by our 3d Warlord DAZ PA, DzFire™!!!

    *** assets in obj, cr2, dsa and jpg format ***

    Download: http://www.mediafire.com/?1fop16a43quifdx
    Or try this if above doesn't work: http://www.mediafire.com/file/1fop16a43quifdx/DzXmasTrain.zip

    DzFire™'s shop: http://www.daz3d.com/shop/dzfire

    And his card below :lol:

    DzFire_XmasTrain.jpg
    1300 x 1000 - 381K
    Post edited by AprilYSH on
  • AprilYSHAprilYSH Posts: 1,481
    edited December 1969

    if you click to see the full size image, you'll notice the lovely wooden texture and the material setting is so good! :D

  • TotteTotte Posts: 13,441
    edited December 1969

    Looking great! Another super xmas present, thx DzFire!

  • WilmapWilmap Posts: 2,917
    edited December 1969

    Oh lovely, and one I can use in DS4.

    Thank you.:-)

Sign In or Register to comment.