General Freebie Requests

1202123252650

Comments

  • kjer_99kjer_99 Posts: 40
    edited December 1969

    It isn't free, but I thought Lisa's Botanicals here at the DAZ store had an item like that about poisonous flowers or plants at one time and I think one of them was Beladonna.

  • 3DProclivity3DProclivity Posts: 538
    edited December 1969

    Anyone know where I can get a decent, free sumo wrestling outfit that will work in Genesis. Must allow commercial renders or I can't use it. What I tried to use looked like a diaper. lol

  • XandoryXandory Posts: 139
    edited December 1969

    kjer_99 said:
    It isn't free, but I thought Lisa's Botanicals here at the DAZ store had an item like that about poisonous flowers or plants at one time and I think one of them was Belladonna.

    She does have a few poisonous plants (I'm such a rabid collector of her stuff), but ironically, none are a basic deadly nightshade. It's on her "requested" list though! :) However, she's got a lot on her plate until the requested list gets hit.

  • mjc1016mjc1016 Posts: 15,001
    edited December 2012

    Progress is being made...probably a couple more days.

    I've still got the berries to make. Working on the textures and trying out a couple of different leaf patterns. When I have that nailed down, I'll post a render.

    Well, here it is, without all the leaf tweaking...and no flower textures...

    belladonna.jpg
    800 x 1000 - 624K
    Post edited by mjc1016 on
  • KeryaKerya Posts: 10,943
    edited December 1969

    Anyone know where I can get a decent, free sumo wrestling outfit that will work in Genesis. Must allow commercial renders or I can't use it. What I tried to use looked like a diaper. lol


    Do you have the M3 shapes for autofit?
    http://kousuke7.wordpress.com/poser-free-stuff/
    link to skydrive

  • 3DProclivity3DProclivity Posts: 538
    edited December 2012

    Kerya said:
    Anyone know where I can get a decent, free sumo wrestling outfit that will work in Genesis. Must allow commercial renders or I can't use it. What I tried to use looked like a diaper. lol


    Do you have the M3 shapes for autofit?
    http://kousuke7.wordpress.com/poser-free-stuff/
    link to skydrive

    Yes I do. Thank you!

    What an awesome link! Has several variations and everything else for a sumo wrestler I didn't even know I needed. :)

    Post edited by 3DProclivity on
  • XandoryXandory Posts: 139
    edited December 1969

    mjc1016 said:
    Progress is being made...probably a couple more days.

    I've still got the berries to make. Working on the textures and trying out a couple of different leaf patterns. When I have that nailed down, I'll post a render.

    Well, here it is, without all the leaf tweaking...and no flower textures...

    *Squeeee* Thank you for taking the time to do this. :)

  • kjer_99kjer_99 Posts: 40
    edited December 1969

    Now, I have a request. I need an ol' Timey Western Marshall's badge or star badge. I know they are out there but I can't seem to find them. I can use purchased items if I have to but prefer a good freebie, if such is available. Thanks, to all of you.

    And thank you, Xandory, for correcting--or refining--my previous comment about Lisa's Botanicals. It looks like mjc1016 is doing a first rate job of taking care of the problem. Thanks, mjc!

    Jeremy

  • SkirikiSkiriki Posts: 4,972
    edited December 2012

    You can find those badges from RDNA's freebies. Let me dig a link...

    Here we go, badges. (you have to register to download.)

    Post edited by Skiriki on
  • Eustace ScrubbEustace Scrubb Posts: 2,686
    edited December 1969

    Emperor Ken (Gilliand) has badges on his website: http://www.empken.com/downloads/downloads1.html

    I prefer Ken's in part over the RDNA set because they include badges for a Dodge City Sheriff and a Pinkertons op, whereas the RDNA ones all say "Marshall".

  • SeiginotoraSeiginotora Posts: 106
    edited December 1969

    pastels said:
    With it's current popularity I'm kind of surprised I haven't seen an Iron Throne as seen in "Game of Thrones" either for sale or as a freebie. Maybe I've just missed it but if not perhaps one of the many model makers here might try a stab at it. I for one would certainly be willing to purchase it. Just a thought.

    Seconded. I'd love to see an Iron Throne prop down the road.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    pastels said:
    With it's current popularity I'm kind of surprised I haven't seen an Iron Throne as seen in "Game of Thrones" either for sale or as a freebie. Maybe I've just missed it but if not perhaps one of the many model makers here might try a stab at it. I for one would certainly be willing to purchase it. Just a thought.

    Seconded. I'd love to see an Iron Throne prop down the road.

    It would not be a very easy item to model...the poly count would be outrageous. Making use of normal maps would drop the count to something closer to reasonable, though...but still it would be a lot of work. And since it is a 'show' item, it would be 'noncommercial' so it would almost have to be a freebie...

    Of course the easiest way would be to buy one of the many physical models of it and use a 3d scanner...

  • SkirikiSkiriki Posts: 4,972
    edited December 1969
  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Anyone know where I can find an Army style canteen (with cover) like this: http://armynavy.ws/canteen/cantee5.jpg ? I've looked on both Renderosity and ShareCG.com, and all "Canteen" brings up is things related to a cafeteria or bar.

  • ChoholeChohole Posts: 33,604
    edited December 2012

    Anyone know where I can find an Army style canteen (with cover) like this: http://armynavy.ws/canteen/cantee5.jpg ? I've looked on both Renderosity and ShareCG.com, and all "Canteen" brings up is things related to a cafeteria or bar.

    maybe a search for Flask would bring up more results ? just a thought

    Post edited by Chohole on
  • drucdruc Posts: 323
    edited December 1969

    chohole said:
    Anyone know where I can find an Army style canteen (with cover) like this: http://armynavy.ws/canteen/cantee5.jpg ? I've looked on both Renderosity and ShareCG.com, and all "Canteen" brings up is things related to a cafeteria or bar.

    maybe a search for Flask would bring up more results ? just a thought

    If you are willing to pay for one, your can get "US Paratrooper WWII Gear (for Poser)" at http://www.ontarget3d.com/site/Products/133-us-paratrooper-wwii-gear-for-poser.aspx free site registration is required to purchase or download freebies, no site registration is required to look.

  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 2012

    chohole said:
    Anyone know where I can find an Army style canteen (with cover) like this: http://armynavy.ws/canteen/cantee5.jpg ? I've looked on both Renderosity and ShareCG.com, and all "Canteen" brings up is things related to a cafeteria or bar.

    maybe a search for Flask would bring up more results ? just a thoughtNope. All that brings up are laboratory flasks and one whiskey flask.

    druc said:
    Anyone know where I can find an Army style canteen (with cover) like this: http://armynavy.ws/canteen/cantee5.jpg ? I've looked on both Renderosity and ShareCG.com, and all "Canteen" brings up is things related to a cafeteria or bar.

    maybe a search for Flask would bring up more results ? just a thought

    If you are willing to pay for one, your can get "US Paratrooper WWII Gear (for Poser)" at http://www.ontarget3d.com/site/Products/133-us-paratrooper-wwii-gear-for-poser.aspx free site registration is required to purchase or download freebies, no site registration is required to look.Nope. Needs to be a freebie. I can't afford to be buying stuff. I don't have the "disposable" income.

    Post edited by Tramp Graphics on
  • SweetleafSweetleaf Posts: 32
    edited December 2012

    So something like this, but with a canvas wrap type of thing?

    2nd.jpg
    1161 x 683 - 18K
    Post edited by Sweetleaf on
  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Sweetleaf said:
    So something like this, but with a canvas wrap type of thing?

    Yep. That's exactly what I'm looking for. The "canvas cover" is for carrying the canteen on a soldier's LBE belt.
  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Dollygirl said:
    I could use a couple of freebie conforming hair styles that can be used for commercial renders and are compatible with Genesis figures (either as V4/M4A4/H4 hair or made for Genesis). The first needs to be something similar to Ice-Boy's "Slic Hair". The second needs to be pulled back into a long ponytail at the nape of the neck (no bangs).

    I've looked through the freebie links thread and cannot find what I need.

    Tramp,
    These two are for V3 but I have used both with V4 by resizing and then parenting.
    Flo Hair, has a tie back option as one of the morphs.
    http://www.morphography.uk.vu/dlflo2.html
    All Back Hair, 2nd one down.
    http://digitalbabes.jp/ I finally got around to testing the Flo Hair option, and it's a no-go. It's too "loose" and too low, and the front of the hair is all wrong too. What I need in a ponytail is tightly pulled back to the base of the skull, as a man with long hair would wear. similar to these:






  • DollyGirlDollyGirl Posts: 2,645
    edited December 1969

    I finally got around to testing the Flo Hair option, and it's a no-go. It's too "loose" and too low, and the front of the hair is all wrong too. What I need in a ponytail is tightly pulled back to the base of the skull, as a man with long hair would wear. similar to these:






    Tramp is this what you want? I used Kozaburo's All back hair. It has a morph at the neck that you can pull the neck hairs to the back. And Aprilish's Horse tail. I took the horse tail into the Building and Scripting tab and reassigned the pony tail base polys to a new group and then hid that part of the hair. Then I added a D-former to the bend of the pony tail and made it not so tight of a bend. Oh how I just love my DAZ4.5 Pro.Model bashing is so much fun. Here are the links to the hairs.
    Horse Tail Hair
    http://shop.aprilsvanity.com/-free-items/cat_10.html?page=1 8 down
    All Back Hair
    http://digitalbabes.jp Go to Downloads, second one down.

    Also there is an 18th century hair on ShareCG that you can hide the curls. Not as nice as the above but it is something:
    http://www.sharecg.com/v/36478/View/11/Poser/18.th-century-Wig

    pullbackhair.jpg
    541 x 700 - 173K
  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Dollygirl said:
    I finally got around to testing the Flo Hair option, and it's a no-go. It's too "loose" and too low, and the front of the hair is all wrong too. What I need in a ponytail is tightly pulled back to the base of the skull, as a man with long hair would wear. similar to these:






    Tramp is this what you want? I used Kozaburo's All back hair. It has a morph at the neck that you can pull the neck hairs to the back. And Aprilish's Horse tail. I took the horse tail into the Building and Scripting tab and reassigned the pony tail base polys to a new group and then hid that part of the hair. Then I added a D-former to the bend of the pony tail and made it not so tight of a bend. Oh how I just love my DAZ4.5 Pro.Model bashing is so much fun. Here are the links to the hairs.
    Horse Tail Hair
    http://shop.aprilsvanity.com/-free-items/cat_10.html?page=1 8 down
    All Back Hair
    http://digitalbabes.jp Go to Downloads, second one down.

    Also there is an 18th century hair on ShareCG that you can hide the curls. Not as nice as the above but it is something:
    http://www.sharecg.com/v/36478/View/11/Poser/18.th-century-WigThat picture is exactly the hair style I'm looking for, at least very close to it. A little higher of the hair line with a bit of a "widow's peak" and it would be perfect. I'm still using 4.0, and don't have a "Building and Scripting" tab, and still haven't figured out making custom DFormers yet anyway, That 18th century wig is definitely not what I want. FYI, I do have Koz's Allback Hair already.

  • DollyGirlDollyGirl Posts: 2,645
    edited December 1969

    That picture is exactly the hair style I'm looking for, at least very close to it. A little higher of the hair line with a bit of a "widow's peak" and it would be perfect. I'm still using 4.0, and don't have a "Building and Scripting" tab, and still haven't figured out making custom DFormers yet anyway, That 18th century wig is definitely not what I want. FYI, I do have Koz's Allback Hair already.

    Understand.

    Do you have 4.0 Pro? If you have the Pro then you should be able to go into Window ->Pane(Tabs) ->Tool Settings. Once the tab is open just under Tool Settings heading you will see Active Tool: by clicking on the white down arrow to the right you can select Polygon Group Editor. Your window will show a wire representation of the model.
    Here are some places to start to learn about these things. Once you get the hang of it you can take models and modify them like this hair thing and get the hair line you want.

    Here is the D-Form Wiki
    http://docs.daz3d.com/doku.php/artzone/pub/software/dform/start

    Here is a Polygon Group Editor video that will give you an idea of how to use this tool:
    http://www.youtube.com/watch?v=k52wwyv234U&list=PLE026B44096BBD507&index=4
    The video is teaching you how to weight map an object but he does go over the basics for using the tool.

    The allback hair does use maps, so you may be able to modify them to move the hair line a little.
    Lots of work but doing this work will make you a much better 3D artist and control your destiny. Looking forward to seeing what you come up with.

  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 2012

    I came up with my own jury-rig using a combination of Koz' All Back hair and Mylochka's Hi Pony hair, but it's still not perfect because matching the textures was not easy and far from perfect by any means, and the morphs that come with Mylochka's hair aren't working. So this is still only a stop-gap. A real tight low ponytail hairstyle for M4 or Genesis is still needed

    Night-Warrior-test-render-11.jpg
    1000 x 1294 - 95K
    Post edited by Tramp Graphics on
  • drucdruc Posts: 323
    edited December 1969

    I came up with my own jury-rig using a combination of Koz' All Back hair and Mylochka's Hi Pony hair, but it's still not perfect because matching the textures was not easy and far from perfect by any means, and the morphs that come with Mylochka's hair aren't working. So this is still only a stop-gap. A real tight low ponytail hairstyle for M4 or Genesis is still needed

    A big difference between DAZ 4 Pro and DAZ 4.5 Pro is 4.5 carries over most morphs when using the fit to Genesis option. I say most because it depends on how the morph was created. DAZ 4.5 Pro is free and stable (at least for me). Upgrading would sort out the issue of morphs not working.

  • robkelkrobkelk Posts: 3,259
    edited December 2012

    I find I need an Asian (Shanghai Chinese, if it matters) skin with freckles, for V4/S4. Are there any out there already?

    (I have a few freckled skin MATs and a few olive skin MATs in my collection, but I don't have any that fit both requirements...)

    Post edited by robkelk on
  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    druc said:
    I came up with my own jury-rig using a combination of Koz' All Back hair and Mylochka's Hi Pony hair, but it's still not perfect because matching the textures was not easy and far from perfect by any means, and the morphs that come with Mylochka's hair aren't working. So this is still only a stop-gap. A real tight low ponytail hairstyle for M4 or Genesis is still needed

    A big difference between DAZ 4 Pro and DAZ 4.5 Pro is 4.5 carries over most morphs when using the fit to Genesis option. I say most because it depends on how the morph was created. DAZ 4.5 Pro is free and stable (at least for me). Upgrading would sort out the issue of morphs not working.Not really because the hair is prop hair, not conforming hair. the hair is parented to his head, not fit to it. There should be n reason for the morphs not to work.

  • mjc1016mjc1016 Posts: 15,001
    edited December 2012

    robkelk said:
    I find I need an Asian (Shanghai Chinese, if it matters) skin with freckles, for V4/S4. Are there any out there already?

    (I have a few freckled skin MATs and a few olive skin MATs in my collection, but I don't have any that fit both requirements...)

    I haven't seen any freckled Oriental skins...but there are some nice freckle brush sets for PS and Gimp...you could always make an overlay.

    here's a quickie I did (quick to set up...took about 10 minutes in Gimp to make the overlay, then just rendered it a few minutes ago. I'm using the SampleLana with the overlay applied in the LIE setting under the skinface surface setting) It's a bit darker than needed..

    The second one is the same overlay, toned down a little...

    frecklesoverlay2.jpg
    800 x 1000 - 256K
    frecklesoverlay1.jpg
    800 x 1000 - 262K
    Post edited by mjc1016 on
  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Sweetleaf said:
    So something like this, but with a canvas wrap type of thing?

    Where did you find that canteen?
This discussion has been closed.