General Freebie Requests

Comments

• katieshelby19_94b3323faf Posts: 8

  September 2012 edited December 1969

  anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks
• DollyGirl Posts: 2,646

  September 2012 edited December 1969

  ThinMick said:

  Anyone know where I can find a flamenco dancer's dress? Preferably for V4, but CrossDresser and I can have a conversation with anything you can come up with.

  I don't know of any free dresses but you could do some kit basing and come up with something. This was what I found:

  skirt (Gothic for V4):
  http://www.sharecg.com/v/54529/gallery/11/Poser/Gothic-for-V4-*New*

  bodice and sleeves Rococo for V4):
  http://forumarchive.daz3d.com/viewtopic.php?t=106182&postdays=0&postorder=asc&start=0&sid=67e25b2f4ff005edf79c0f5de0a6c00f

  For the scarf I would use the Fortune Teller for the 1930 dress:

  http://www.daz3d.com/shop/fortune-teller-1930-for-v4

  You will have to do some trans maps or redo object mapping which 4.5 Pro can do to make the pieces go together more easily. Here is Cho's tut on texturing and transmap creation:
  http://chohole.ovbi.org/texture_tutorial.htm
  Just an idea.
• Chohole Posts: 33,604

  September 2012 edited September 2012

  elvisfan20 said:

  anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks

  Simple answer to that one is that you will not find either V4 or V5 for free. THey are both DAZ 3D products, and can only be bought from the DAZ 3D strore.

  And never let anyone tell you any different.

  Post edited by Chohole on September 2012
• katieshelby19_94b3323faf Posts: 8

  September 2012 edited December 1969

  okay thanks y'all been a big help
• DollyGirl Posts: 2,646

  September 2012 edited December 1969

  elvisfan20 said:

  okay thanks y'all been a big help

  DAZ still allows c|net to carry the gen three figures. There is lots of stuff for them.

  http://download.cnet.com/Poser-DAZStudio-3D-Models-Pack/3000-6677_4-10579249.html
• mjc1016 Posts: 15,001

  September 2012 edited December 1969

  chohole said:

  elvisfan20 said:

  anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks

  Simple answer to that one is that you will not find either V4 or V5 for free. THey are both DAZ 3D products, and can only be bought from the DAZ 3D strore.

  And never let anyone tell you any different.

  Not quite true...V5 was available, a couple of months back, on the DVD included with 3DArtist magazine...issue #43, I think, so if you can find a print back issue with the disk, you can get if for free. Keep an eye out on the various mags...Digital Arts, 3D Artist and 3D World, because every so often things do show up on the disks.
• katieshelby19_94b3323faf Posts: 8

  September 2012 edited December 1969

  thanks everyone:)
• carrie58 Posts: 3,951

  September 2012 edited December 1969

  ThinMick said:

  Anyone know where I can find a flamenco dancer's dress? Preferably for V4, but CrossDresser and I can have a conversation with anything you can come up with.

  If you are a PC member you could get the flamenco dress for V3 for 1.99
• patience55 Posts: 7,006

  September 2012 edited December 1969

  mjc1016 said:

  chohole said:

  elvisfan20 said:

  anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks

  Simple answer to that one is that you will not find either V4 or V5 for free. THey are both DAZ 3D products, and can only be bought from the DAZ 3D strore.

  And never let anyone tell you any different.

  Not quite true...V5 was available, a couple of months back, on the DVD included with 3DArtist magazine...issue #43, I think, so if you can find a print back issue with the disk, you can get if for free. Keep an eye out on the various mags...Digital Arts, 3D Artist and 3D World, because every so often things do show up on the disks.

  That's correct [although at about $20 per mag, not exactly free lol ...] What I wanted to mention though is that people might still find references to free models such as V4 because "once upon a time" they were free. While that offer has since been closed, sales abound throughout the year.
• robkelk Posts: 3,259

  September 2012 edited December 1969

  Dollygirl said:

  robkelk said:

  I suspect I already have this somewhere in my collection, but I can't seem to find it...

  I need a wavy "pageboy" cut hairdo for V4, preferably already with a ginger-red MAT.

  
  (It would be really, really nice if we could put images into the posts instead of just at the end, and if there were images in the Free Hair and Hair related Items List...)

  
  Wave hair
  http://digitalbabes.jp/
  V4 fit and more textures
  http://www.sharecg.com/v/43471/View/11/Poser/JL-Koz-Wave-Hair---Geometry-correction-+-15-shades

  Thanks, Dlollygirl!

  (I did have all of Koz' hairdos - not installed, though - but I didn't have the V4 fit.)
• Tramp Graphics Posts: 2,404

  September 2012 edited December 1969

  Dollygirl said:

  robkelk said:

  I suspect I already have this somewhere in my collection, but I can't seem to find it...

  I need a wavy "pageboy" cut hairdo for V4, preferably already with a ginger-red MAT.

  
  (It would be really, really nice if we could put images into the posts instead of just at the end, and if there were images in the Free Hair and Hair related Items List...)

  
  Wave hair
  http://digitalbabes.jp/
  V4 fit and more textures
  http://www.sharecg.com/v/43471/View/11/Poser/JL-Koz-Wave-Hair---Geometry-correction-+-15-shadesIs there a V4 fit for the Koz Long hair? I looked for one but couldn't find it. Too bad someone can't make full on Genesis fits for these hair figures.
• mjc1016 Posts: 15,001

  September 2012 edited December 1969

  Tramp Graphics said:

  Dollygirl said:

  robkelk said:

  I suspect I already have this somewhere in my collection, but I can't seem to find it...

  I need a wavy "pageboy" cut hairdo for V4, preferably already with a ginger-red MAT.

  
  (It would be really, really nice if we could put images into the posts instead of just at the end, and if there were images in the Free Hair and Hair related Items List...)

  
  Wave hair
  http://digitalbabes.jp/
  V4 fit and more textures
  http://www.sharecg.com/v/43471/View/11/Poser/JL-Koz-Wave-Hair---Geometry-correction-+-15-shades

  Is there a V4 fit for the Koz Long hair? I looked for one but couldn't find it. Too bad someone can't make full on Genesis fits for these hair figures.

  Actually, they are pretty easy to convert to Genesis.

  If you don't have the Gen3 shapes, then using a Gen4 fit before converting by the instructions in this thread, works very well.

  http://www.daz3d.com/forums/discussion/1866/
• Tramp Graphics Posts: 2,404

  September 2012 edited December 1969

  I do a lot of that already. But it really doesn't work if you don't have the V4 fit to begin with.
• DollyGirl Posts: 2,646

  September 2012 edited December 1969

  I have a question. I am installing the outfit as pictured in the image below but the boots do not have a dsf file in the People/Genesis/Clothing/J_Shirt directory. There are files for the boots in the data directory. Anybody have any ideas how to create, obtain this file? The readme does not have the creator's contact information and it says there will be no support. Got any ideas?
  Lonnie

  

  

  Genesis_Boots_Top_Pants.png

  969 x 1013 - 2M
• patience55 Posts: 7,006

  September 2012 edited December 1969

  Dollygirl said:

  I have a question. I am installing the outfit as pictured in the image below but the boots do not have a dsf file in the People/Genesis/Clothing/J_Shirt directory. There are files for the boots in the data directory. Anybody have any ideas how to create, obtain this file? The readme does not have the creator's contact information and it says there will be no support. Got any ideas?
  Lonnie

  This is a freebie? Link please ....
• DollyGirl Posts: 2,646

  September 2012 edited December 1969

  Patience55 said:

  Dollygirl said:

  I have a question. I am installing the outfit as pictured in the image below but the boots do not have a dsf file in the People/Genesis/Clothing/J_Shirt directory. There are files for the boots in the data directory. Anybody have any ideas how to create, obtain this file? The readme does not have the creator's contact information and it says there will be no support. Got any ideas?
  Lonnie

  This is a freebie? Link please ....

  I would if I could Patience but I have no clue where I got the file. It is a Japaneese artist but I don't know their handle. This is the file name:
  Genesis_Boots_Top_Pants.zip and the readme has no details. I downloaded the file on Dec 26 2011. Anybody else have more information?
• SteveM17 Posts: 971

  September 2012 edited December 1969

  I'm looking for spaceship interiors/cockpits. NOT one's based on copyrighted stuff (Star Wars, Star Trek etc) please.
• Kerya Posts: 10,943

  September 2012 edited December 1969

  SteveM17 said:

  I'm looking for spaceship interiors/cockpits. NOT one's based on copyrighted stuff (Star Wars, Star Trek etc) please.

  http://www.renderosity.com/mod/freestuff/details.php?item_id=68769
  http://www.sharecg.com/v/63187/gallery/5/3D-Model/Multi-Purpose-Shuttle-MPS2A-Beaver-.obj-version
• LuckBe Posts: 93

  September 2012 edited December 1969

  I'm trying to find rustic or medieval style farm tools- shovels, pitchfork, bales of hay, and especially a water trough and a wooden bucket. Rustic fencing would be a plus as well! If anyone knows where I could find such things you'd make my week! :D
• Kerya Posts: 10,943

  September 2012 edited December 1969

  Hay bales
  http://www.renderosity.com/mod/freestuff/details.php?item_id=69053
  http://fast3d.co.uk/barn/barn.htm
  http://forum.runtimedna.com/downloads.php?do=file&id=385
• Kerya Posts: 10,943

  September 2012 edited December 1969

  Fork
  http://www.buckrogers.demon.co.uk/3d/3d.htm (and shovel)
  http://www.greylight.com/posermisc.html

  horse-drawn rake
  http://www.sharecg.com/v/20020/View/5/3D-Model/Horse-drawn-rake

  shovel
  http://www.sharecg.com/v/46582/View/5/3D-Model/Shovel
  http://www.sharecg.com/v/2614/View/5/3D-Model/Shovel-Collection
  http://www.amazing3d.com/free/free.shtml
• Kerya Posts: 10,943

  September 2012 edited September 2012

  Bucket
  http://www.sharecg.com/v/35967/View/5/3D-Model/Ancient-Bucket-(OBJ)
  http://www.renderosity.com/mod/freestuff/details.php?item_id=59321
  not wooden, but rusty:
  http://www.khiba.com/3DBP/models.htm

  Couldn't find a trough ...

  Post edited by Kerya on September 2012
• LuckBe Posts: 93

  September 2012 edited December 1969

  Yaaay, you are wonderful, thank you so much!
• patience55 Posts: 7,006

  September 2012 edited December 1969

  http://www.turbosquid.com/FullPreview/Index.cfm/ID/333094 3ds/lwo water trough
• mjc1016 Posts: 15,001

  September 2012 edited December 1969

  I have a stone sink

  http://www.sharecg.com/v/56956/gallery/21/DAZ-Studio/Stone-Sink

  You can remove the stand and drain and use it as a water trough.
• LuckBe Posts: 93

  September 2012 edited December 1969

  I retextured the turbosquid one and it looks like it'll work- I can use the sink, too, for a different render. Thanks again!

  Turbosquid trough after a little love- cleans up pretty well!

  

  

  troughtest.png

  600 x 600 - 880K
• Serene Night Posts: 17,559

  September 2012 edited December 1969

  Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?
• patience55 Posts: 7,006

  September 2012 edited December 1969

  ladychance said:

  I retextured the turbosquid one and it looks like it'll work- I can use the sink, too, for a different render. Thanks again!

  Turbosquid trough after a little love- cleans up pretty well!

  Nice! Amazing what a little TLC will do.
• SteveM17 Posts: 971

  September 2012 edited September 2012

  Kerya said:

  SteveM17 said:

  I'm looking for spaceship interiors/cockpits. NOT one's based on copyrighted stuff (Star Wars, Star Trek etc) please.

  http://www.renderosity.com/mod/freestuff/details.php?item_id=68769
  http://www.sharecg.com/v/63187/gallery/5/3D-Model/Multi-Purpose-Shuttle-MPS2A-Beaver-.obj-version
  

  Works well, thanks, I shall certainly be using this.

  Are there any big spaceship interiors as well out there, rather than small craft?

  EDIT: I found some of the stuff I was looking for by accident, here is the site for anyone wanting similar: http://www.shadowy.de/modelle/modelle_start.html

  Post edited by SteveM17 on September 2012
• DollyGirl Posts: 2,646

  September 2012 edited December 1969

  SereneNight said:

  Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?

  Did you try this page?
  http://www.planit3d.com/source/meshes_files/aquatics01.html